diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/source/reference/bare-metal/ironic-guide.rst | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/doc/source/reference/bare-metal/ironic-guide.rst b/doc/source/reference/bare-metal/ironic-guide.rst index 62fc93673..d7a5ee90b 100644 --- a/doc/source/reference/bare-metal/ironic-guide.rst +++ b/doc/source/reference/bare-metal/ironic-guide.rst @@ -26,7 +26,7 @@ define a network to be used for the Ironic cleaning network: ironic_dnsmasq_interface: "eth1" ironic_cleaning_network: "public1" -Finally, define at least one DHCP range for Ironic inspector: +Finally, define at least one DHCP range for Ironic inspection: .. code-block:: yaml @@ -76,7 +76,7 @@ The default lease time for each range can be configured globally via ``ironic_dnsmasq_dhcp_default_lease_time`` variable or per range via ``lease_time`` parameter. -In the same file, specify the PXE bootloader file for Ironic Inspector. The +In the same file, specify the PXE bootloader file for Ironic inspection. The file is relative to the ``/var/lib/ironic/tftpboot`` directory. The default is ``pxelinux.0``, and should be correct for x86 systems. Other platforms may require a different value, for example aarch64 on Debian requires @@ -86,7 +86,7 @@ require a different value, for example aarch64 on Debian requires ironic_dnsmasq_boot_file: pxelinux.0 -Ironic inspector also requires a deploy kernel and ramdisk to be placed in +Ironic inspection also requires a deploy kernel and ramdisk to be placed in ``/etc/kolla/config/ironic/``. The following example uses coreos which is commonly used in Ironic deployments, though any compatible kernel/ramdisk may be used: @@ -103,7 +103,7 @@ You may optionally pass extra kernel parameters to the inspection kernel using: .. code-block:: yaml - ironic_inspector_kernel_cmdline_extras: ['ipa-lldp-timeout=90.0', 'ipa-collect-lldp=1'] + ironic_kernel_cmdline_extras: ['ipa-lldp-timeout=90.0', 'ipa-collect-lldp=1'] in ``/etc/kolla/globals.yml``. @@ -120,7 +120,7 @@ Revert to plain PXE (not recommended) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Starting with Yoga, Ironic has changed the default PXE from plain PXE to iPXE. Kolla Ansible follows this upstream decision by choosing iPXE as the default -for Ironic Inspector but allows users to revert to the previous default of +for Ironic inspection but allows users to revert to the previous default of plain PXE by setting the following in ``/etc/kolla/globals.yml``: @@ -215,7 +215,7 @@ Post-deployment configuration The :ironic-doc:`Ironic documentation <install/configure-glance-images>` describes how to create the deploy kernel and ramdisk and register them with Glance. In this example we're reusing the same images that were fetched for the -Inspector: +inspection: .. code-block:: console |